Raspberry Pi Hardware Reference

Raspberry Pi Hardware Reference

4.11 - 1251 ratings - Source

The Raspberry Pi is deceptively simple. Plug it in, boot it up, and use it as a personal computer, or attach a million gizmos and modules and invent something new and amazing. Either way, what it can actually do is not simple, and you should know exactly what the Raspberry Pi hardware is all about. Raspberry Pi Hardware Reference, from Mastering the Raspberry Pi, is the hardware guide you need on your desk or workbench. Every detail is covered: from power to memory, from the CPU to working with USB. You'll find all the details about working with both wired and wireless Ethernet, SD cards, and the UART interface. The GPIO chapter is invaluable, covering power budgeting, access, and even small but important details like the correct usage of sudo when working with GPIO pins. You'll also find details about the 1-Wire driver, the I2C bus, and the SPI bus. If you need to know anything about your Raspberry Pi's hardware, you will find it here, in Raspberry Pi Hardware Reference. What youa€™ll learn How to work with Raspberry Pi power, including adapters and battery requirements Working with header strips and LEDs Working with SDRAM and memory mapping Understanding the CPU Interface details, including USB, UART, and GPIO Who this book is for Raspberry Pi hobbyists who need know all of the details about Raspberry Pi hardware and what Linux files and commands control that hardware. Table of Contents Ch. 1 - The Raspberry Pi Ch. 2 a€“ Figuring Out Power Requirements Ch. 3 - Header Strips, LEDs, and Reset Ch. 4 a€“ Working with Memory Ch. 5 a€“ The CPU and Working with Threads Ch. 6 a€“ USB Power and API Support Ch. 7 a€“ Working with Wired and Wireless Ethernet Ch. 8 - SD Card Storage Ch. 9 a€“ Serial Communication Ch. 10 a€“ GPIO: Your Interface to the Outside World Ch. 11 - 1-Wire Driver Ch. 12 - I2C Bus: The Two Wire Interface Ch. 13 - SPI Bus: Signaling, API, and Testing Appendix A: Glossary Appendix B: Power Standards Appendix C: Electronics ReferenceE-book Adapters Some people have reported good success using e-book power adapters. I have also ... If you lack an oscilloscope, you wona#39;t be able to check how clean or dirty your supply current is. ... Voltage Test If you have a DMM or other suitable voltmeter, it is worthwhile to perform a test after powering up the Pi.

Title:Raspberry Pi Hardware Reference
Author: Warren Gay
Publisher:Apress - 2014-11-18

You must register with us as either a Registered User before you can Download this Book. You'll be greeted by a simple sign-up page.

Once you have finished the sign-up process, you will be redirected to your download Book page.

How it works:
  • 1. Register a free 1 month Trial Account.
  • 2. Download as many books as you like (Personal use)
  • 3. Cancel the membership at any time if not satisfied.

Click button below to register and download Ebook
Privacy Policy | Contact | DMCA